Custom hospitality bar table and stools

COLD PLUNGES

Cold Plunge Tubs for Hospitality, Wellness & Residential Development

 

BUILT FOR
PROJECT CERTAINTY

MATERIAL TRUTH

Custom metalwork specialists. Built to your vision.

DEFINITIVE DETAILING

Proportion, material, finish and detail. Defined around your project.

PRECISION ENGINEERING

Every detail specified before fabrication. Every approved decision carried through.

GUIDED CONFIDENCE

Clear guidance from design through delivery. Know what matters and what comes next.

Hospitality dining table with chairs
 

DESIGNED FOR THE WELLNESS EXPERIENCE

CopperSmith cold plunge tubs bring real metal, refined proportion and integrated performance into wellness environments. Material, dimensions, finish and chilling requirements are considered together, creating a cold plunge that feels integral to the space while delivering the performance the experience demands.

Outdoor bar seating

RESIDENTIAL

Patio dining setup

SPA + WELLNESS

Bar stool seating

HOSPITALITY

Armless bench in restaurant setting

Integrated Chilling

Built-in chilling technology maintains consistent temperatures while preserving a clean architectural form.

Armless bench in restaurant setting

Full-Body Insulation

Full-surround insulation improves thermal efficiency and maintains reliably cold water temperatures.

Armless bench in restaurant setting

Engineered Structure

A reinforced frame and stainless steel base provide lasting strength and stability.

Armless bench in restaurant setting

Integrated Teak Cover

Natural teak panels conceal the chiller while creating a unified architectural appearance.

 

Materials & Finish Options

Real materials. Distinctive finishes. Defined around your project.
Explore copper, stainless steel, powder-coated metal, wood, and a considered range of finishes developed to work with the surrounding space.

Copper finish swatch

Copper

Black finish swatch

Brass

Stainless steel finish swatch

Stainless Steel

Powder-coated finish swatch

Powder-Coated

Wood finish swatch

Wood

Designed
Without
Compromise
Designed Without
Compromise

PROPORTION,
RESOLVED

Dimensions and profile are considered in relationship to your cabinetry, cooking surface, and surrounding architecture, so the hood feels intentional within the space.

PERFORMANCE,
INTEGRATED

Ventilation is engineered alongside the design, bringing performance requirements and architectural intent together from the start.

MATERIAL,
UNDERSTOOD

Real metal, finish, and architectural details are selected for what they bring to the larger design, from tone and contrast to texture, variation, and character.

DETAILS,
CARRIED THROUGH

Detailed CAD drawings bring every decision together before fabrication. Once approved, those specifications guide production through the finished piece.

ARCHITECTURAL METALWORK FOR DESIGNED SPACES.

Modern restaurant interior

MASTERS IN METAL.

MASTERS
IN METAL.
Over 97% customer satisfaction Customers are satisfied with their finished product.
Trusted by 5,000+ Interior designers, architects, and builders.
Rated 4.7 Five stars Based on thousands of third-party reviews.

DESIGN & CONFIGURE

Explore the possibilities and make your initial selections. Our team is available to guide dimensions, material, finish, performance, and architectural details.

REVIEW & APPROVE

We translate your selections into a detailed CAD drawing so you can review dimensions and key specifications before fabrication.

FABRICATION & FINISHING

With the drawing approved, your piece moves into fabrication and finishing, guided by the specifications you've reviewed.

INSPECTION & DELIVERY

Your finished piece is inspected, carefully packaged, and coordinated for delivery to your project.

Talk With a Specialist

Have a question about your design, dimensions, finish, or next step? Our team can help you resolve the details and move your project forward with confidence.

Please enter your first name
Please enter your last name
Please enter a valid email
Please enter a valid phone number
Please select a country
Please select a state
Please enter a message

No obligation. Response within 1 business day.

By submitting, you agree to our Privacy Policy & Terms

Custom Cold Plunge Tubs

REAL METAL. CONTROLLED COLD. DEFINED FOR THE SPACE.

A cold plunge should work as carefully as it is designed. CopperSmith® brings the tub, structure, insulation, circulation, and temperature control into one considered ice bath system. Its real-metal body gives a residential retreat, spa, or hospitality setting a distinct material presence, while the chiller maintains the selected water temperature automatically.

Choose stainless steel, copper, or brass to establish the character of the piece. Copper and brass are living metals: their appearance can develop with exposure and use. A proprietary natural finish and a choice of 16- or 14-gauge construction support a durable, carefully resolved vessel. Material, finish, and care requirements are reviewed for the specific installation.

The System Behind the Experience

The chiller holds a user-selected temperature through automatic controls. Circulation and ozone are integrated into the water-management design, alongside full-body insulation and an engineered supporting structure. Project planning addresses the tub and mechanical equipment together, including access, ventilation, water connection, drainage, power, and the space needed for service.

For a private wellness room or a shared hospitality setting, a CopperSmith® specialist can help define dimensions, metal, finish, system placement, and the installation approach. Project-specific drawings clarify the selected configuration before fabrication.

Place the Plunge in the Larger Design

Explore custom bathtubs and CopperSmith® bathtubs for related bath metalwork. Start your project to coordinate a cold plunge for a residence, spa, or hospitality property.

What materials are available for a CopperSmith® cold plunge?

The tub can be specified in stainless steel, copper, or brass. Each material changes the appearance and surface behavior of the piece; the selected finish and care requirements are confirmed with the project team.

What is the difference between 16-gauge and 14-gauge construction?

Both are substantial metal construction choices. The lower gauge number denotes thicker sheet metal. Gauge selection depends on the vessel design and project specification.

Will a copper or brass cold plunge change color over time?

Copper and brass are living metals, so tone and patina can vary with water chemistry, touch, cleaning, and exposure. Review a current finish sample and the care instructions before approval.

How is the water temperature controlled?

The specified chiller uses automatic controls to maintain a chosen setpoint. The available range, recovery time, and performance depend on the final chiller selection, water volume, site conditions, and installation.

What role does ozone play in the system?

Ozone is incorporated into the specified circulating water system. Its operation and maintenance are confirmed with the selected equipment. It does not eliminate the need for appropriate water testing, cleaning, or treatment.

Does the metal surface make the water sanitary?

No. Some copper-alloy surfaces have antimicrobial properties under specific conditions, but a metal tub does not sanitize the plunge water or replace water care. Performance also depends on the exact alloy and finish.

Can the cold plunge be used in a spa or hospitality setting?

Yes, the offering is intended for residential, spa, and hospitality projects. Shared-use requirements, including water management, accessibility, permits, and local health rules, must be reviewed for the site.

What needs to be planned before installation?

Coordinate floor loading, access, equipment placement, electrical service, ventilation, water supply, drainage, and maintenance clearance with the project team. Final requirements come from the approved drawing and selected equipment.

Is the teak cover included?

An integrated teak cover is shown in the design concept. Its inclusion and dimensions should be confirmed in the project quote and approved drawing.

Will I receive a drawing before fabrication?

The selected dimensions and construction details are documented in a project-specific drawing for review before fabrication. The exact scope of mechanical and site documentation is confirmed with the project team.

CopperSmith® cold plunge systems bring real-metal fabrication and a temperature-controlled ice bath into one specified project. The final dimensions, material, gauge, finish, chiller, water-management components, and site requirements are confirmed for the selected configuration.

01 — Material & Finish

Tub materials
Stainless steel, copper, or brass; final availability depends on the selected configuration
Metal gauge
16 gauge or 14 gauge, as specified for the project
Surface character
Copper and brass are living metals that can develop natural variation over time
Finish
Proprietary natural finish; confirm exact finish and care instructions for the chosen material

02 — Vessel & Structure

Tub form
Project-specific proportions and finish coordination
Construction
Engineered support structure and full-body insulation
Cover
Integrated teak cover where included in the selected configuration
Drawing review
Dimensions and assembly details defined in the project-specific drawing

03 — Temperature & Water System

Temperature control
Chiller with automatic controls to maintain the selected setpoint
Water movement
Circulation integrated with the chilling system
Ozone
Ozone component incorporated into the specified water-management system
Operating details
Chiller model, electrical requirements, water care, and service access confirmed for the project

04 — Project Coordination

Settings
Residential wellness spaces, spas, and hospitality projects
Site review
Coordinate location, loading, power, drainage, ventilation, and equipment access with the project team
Approval
Final configuration reviewed through project-specific drawings before fabrication
Next step
Start your project to discuss a specification and quote
Final Project Specification

The approved drawing and component documentation define the tub, equipment, installation clearances, and care requirements. Ozone and metal surfaces do not replace routine water testing, cleaning, or any treatment required by the application and local rules.