Define the details for your project.
CSH-AT2aNeed Help? Talk With a Specialist
Dimensions and profile are considered in relationship to your cabinetry, cooking surface, and surrounding architecture, so the hood feels intentional within the space.
Ventilation is engineered alongside the design, bringing performance requirements and architectural intent together from the start.
Real metal, finish, and architectural details are selected for what they bring to the larger design, from tone and contrast to texture, variation, and character.
Detailed CAD drawings bring every decision together before fabrication. Once approved, those specifications guide production through the finished piece.
ARCHITECTURAL METALWORK FOR DESIGNED SPACES.
Based on thousands of third-party reviews.
Explore the possibilities and make your initial selections. Our team is available to guide dimensions, material, finish, performance, and architectural details.
We translate your selections into a detailed CAD drawing so you can review dimensions and key specifications before fabrication.
With the drawing approved, your piece moves into fabrication and finishing, guided by the specifications you've reviewed.
Your finished piece is inspected, carefully packaged, and coordinated for delivery to your project.
Have a question about your design, dimensions, finish, or next step? Our team can help you resolve the details and move your project forward with confidence.
THREE-SIDED FORM, CONVEX CURVES, HALF-ROUND TRIM.
The Artisan AT2 range hood gives the kitchen a sculpted center of gravity. Its three-sided body moves through a continuous convex curve, while half-round trim defines the lower edge and brings a resolved line to the cabinetry, stone, and hardware around it. Begin with this proven form, then define the proportion, material, patina, texture, and architectural details around your space. Our custom range hoods pair real metal with ventilation selected for the way your kitchen performs.
Specify the AT2 in copper, brass, stainless steel, zinc, aluminum, or a powder-coated finish. A smooth surface keeps the profile quiet and precise; select hammered textures change the reflection and depth of the metal as light moves across the hood. Crown profiles, straps, rivets, and a pot rail can reinforce surrounding finishes or introduce a considered mixed-metal contrast. Each detail has a job within the larger composition.
Like all CopperSmith® range hoods, the AT2 is sized and engineered around the project. Configure it for a wall or island installation, choose the width and height in one-eighth-inch increments, and select an integrated, remote, ductless, BBQ, liner-only, or design-to-fit ventilation solution. Mount type and ventilation determine the final depth. Your fabrication-grade CAD drawing records the exact dimensions and approved details before production begins.
Physical finish samples help you evaluate the metal beside cabinetry, countertops, backsplash, and hardware. A CopperSmith® project specialist can help resolve proportion, finish relationships, airflow, and installation requirements. Once the drawing is reviewed and approved, that specification guides the build from fabrication through final review. The result is a handcrafted metal range hood built to belong in the room and carry the design intent through.
The AT2's convex face gives the hood visual depth without relying on ornament. In hand-hammered copper, surface variation catches the light across the curve and gives the broad metal field a more tactile presence. The half-round trim provides a clear lower boundary, helping the hood read as an architectural part of the kitchen rather than an appliance added after the room was designed.
Material and finish determine how the AT2 relates to the room. Copper can bring warmth to pale stone and painted cabinetry. Brass can echo lighting or hardware. Stainless steel and zinc can establish a quieter, cooler relationship with appliances and architectural surfaces. Straps, rivets, the crown, and the pot rail can match the body or bridge another finish into one considered composition.
The configurator establishes the AT2's material, finish, texture, dimensions, details, mount, and ventilation. Samples make finish decisions tangible. The project-specific drawing then brings every approved choice into one precise specification for the homeowner, designer, builder, and fabrication team. Production begins only after that drawing is approved, protecting the proportion and details that make the hood belong to the space.
The AT2 is a three-sided metal range hood with a continuous convex form, a configurable apron, and half-round lower trim. Its curved face gives the hood depth and presence, while the trim creates a clear architectural edge.
Yes. Select Wall for installation against a wall or Island for installation above an island or peninsula. Mount type works with the ventilation selection to determine the final hood depth.
The AT2 can be configured from 30 to 100 inches wide and from 24 to 100 inches high. Fractional selections allow dimensions to be defined in one-eighth-inch increments. The approved CAD drawing records the final dimensions.
The configurator includes real copper, brass, stainless steel, zinc, and aluminum, along with powder-coated color finishes. Available patinas and tones vary by metal. Physical samples are recommended because metal and patina respond to light and surrounding materials differently than a screen image.
Yes, for compatible materials and finishes. Options include Beehive, Bouquet, Grain, Hand, Heavy, Hood, and Light Hammered textures, as well as Smooth. Stainless steel, zinc, and powder-coated finishes are generally smooth only; the configurator shows the compatible choices after the finish is selected.
Yes, compatible details can be specified to match the body or introduce a mixed-metal relationship. The AT2 offers crown profiles, straps, rivets, and an optional pot rail, with finish and texture choices controlled by the configurator.
Available selections include integrated blowers from 290 to 1260 CFM, remote blowers from 390 to 1260 CFM, a 395 CFM ductless kit, liner-only configurations, Design to Fit for a customer-provided insert, and 1200 or 2300 CFM integrated or remote BBQ ventilation.
Depth depends on whether the hood is wall- or island-mounted and on the selected liner or blower. Wall-mount configurations are typically about 22 to 26 inches deep, while island configurations are typically about 27 to 31 inches deep. These are estimates; the CAD drawing confirms the exact project dimension.
Yes. Choose Design to Fit when supplying a compatible third-party insert. The insert requirements must be reviewed so the hood can be engineered around the specified equipment.
Yes. CopperSmith® prepares a project-specific CAD drawing that defines the approved size, depth, profile, details, and applicable installation information. Fabrication begins only after the drawing is reviewed and approved.
Most finishes are sealed to preserve their intended character. Finishes identified as living finishes can develop additional tone, variation, and patina through time, touch, and use. Review the selected finish sample and care guidance before ordering.
Production and shipping timing varies with size, material, finish, texture, ventilation, and selected details. The project quote provides the current estimated lead time before ordering.
The Artisan AT2 is specified around the project. Final dimensions, depth, finish compatibility, architectural details, and installation information are confirmed in the approved CAD drawing.
Available combinations depend on the selected material, finish, texture, dimensions, mount, ventilation, and architectural details. The configurator and approved CAD drawing provide the definitive project-specific specification.
Kate Smith - Kate Smith Interiors
"It was my first time using a hood from CopperSmith, and I absolutely loved the entire experience."
The Leary's
"We went to a number of high-end establishments locally. Nothing compared to CopperSmith."
"The quality of their work is unsurpassed! Totally exceeded our expectations. Customer service was phenomenal! I would highly recommend to anyone and everyone!"
Julie
"Our experience was excellent. Communication was awesome from the company and the final product was GREAT quality and EXACTLY what we wanted."
Chad
"Absolutely beautiful product--everything I wanted and more!! The wooden crate it was packed in was just as nice! Highly recommend!"
Tracy
"Received excellent customer service, and great advice from the World Coppersmith experts. Loved the sink and hood I purchased … they're truly are pieces of art."
Barbie
"I would absolutely recommend CopperSmith to other interior designers."
Kathryn Troxell - Grace Thomas Designs
"We went to a number of high-end establishments locally. Nothing compared to CopperSmith"
The Leary's
| Feature | Specification |
|---|---|
| Mount | Wall, Island, Undercabinet |
| Width | 30" - 100" |
| Height | 24" - 100" |
| Depth | 22" - 33" |
| Material | Stainless Steel, Copper, Brass, Powder Coated |
| Texture | Smooth and Hammered |
| Accessories | Rivets, Straps, Pot Rail, Crown |
| Feature | Specification |
|---|---|
| Room | Kitchen, Outdoor |
| Style | Artisan |
| Ventilation | 290, 395, 610, 1260 CFM |
| Remote Blower | 395, 835, 1260 CFM |
| CAD Approval | Yes |
| Tolerance | 1/8" |
| Manufacturer | CopperSmith® |
By submitting, you agree to our Privacy Policy & Terms